A Version 2.7 korábban közrebocsátott változat, amelynek gondozása befejeződött.

Manage AtoM configuration files

Many settings in AtoM can be managed directly through the user interface via the Admin > Settings menu (see: Settings for details). However, there are also several configuration files maintained in AtoM’s code where various settings and configurations can be managed, and which can be edited directly by a user via the command-line. These files can be useful for customizing the behavior and performance of your application. Details on each have been included below.

Important

The Symfony PHP framework that AtoM uses uses a configuration cascade - meaning it will look for configuration files in multiple locations in a specific order, and the final configuration will be compiled from all found configuration files in a specific order of preference. See the Symfony documentation for more information:

The locations of the configuration files listed below are the default locations used in a standard installation using the downloadable tarball package provided on the Access to Memory website’s Downloads page.

However, depending on your installation method (or if you are using an Artefactual-provided development environment like the AtoM Vagrant box), these files may appears in different locations, such as in the apps/qubit/config directory.

An example: The Elasticsearch search.yml config file

Before installation, the default version of the search.yml configuration file is found in the Elasticsearch (ES) plugin in AtoM, at:

  • plugins/arElasticSearchPlugin/config/search.yml

This default file is typically copied to its new location once the installer is run as part of the installation process.

If installing via the Artefactual provided downloadable tarball, the new location will typically be:

  • config/search

However, Artefactual uses Ansible deployment scripts to prepare the Vagrant development environment, and in the process, the ES configuration file is set at apps/qubit/config/search.yml.

Making configuration changes

Symfony will compile the settings found in all applicable configuration files, in a specific order of preference. This means that one file will not completely override the other - instead, priority file location values will be favored, but where a configuration setting is not found for a particular parameter in the preferred location, Symfony will check the next location for a relevant parameter.

If a particular parameter exists in multiple files but has different values, then the cascade order preference will determine which setting value takes effect.

If you are uncertain where to make your changes, you can always make them in all relevant configuration files to ensure the changes will take effect as expected.

Jump to:

How to change values in configuration files

From AtoM’s root directory, use the nano command to open a file for editing - e.g.:

nano config/app.yml

You can save changes with CTRL+O + ENTER, and exit with CTRL+X (you will be asked to save if you haven’t yet).

Important

If you change any of the files listed below, clear the cache and restart PHP-FPM to apply the changes.

Back to top

Important configuration files

Below is a list of some of the configuration files available in AtoM that you may need to adjust as a system administrator.

Jump to:

config/app.yml

This is the primary file where AtoM-specific settings that cannot be managed via the user interface are maintained. This file includes settings such as:

  • upload_limit: Global digital object upload limit (in gigabytes) - can be set to -1 for unlimited, or set to a specific limit in GBs.
  • download_timeout: Timeout limit for fetching digital objects from external services (in seconds) - default value is 10s. See also: PHP execution limits.
  • cache_engine: Which cache engine you want to use (can use Memcached for a distributed cache, for example) - default is sfAPCCache
  • read_only: Enable read-only mode, if you want to remove the login button and prevent users from logging into the application. See also: Making AtoM read-only.
  • google_analytics_api_key: Set a Google Analytics API key, for basic installation-wide analytics via Google - see: Web analytics
  • google_analytics_institutions_dimension_index: Set a custom dimension via Google Analytics to allow for per-institution page view counts in a multi-repository system. See: Google Analytics for tracking institutional pageviews
  • google_tag_manager_container_id: Set a Google Tag Manager API key, for further element-specific analytics. See: Google Tag Manager
  • htmlpurifier_enabled: Enable htmlpurifier - limits HTML on static pages to a white-list of approved elements and attributes, to prevent XSS. See: Static pages and security configuration.
  • workers_key: Allows setting a custom key that will add a unique hash to the Gearman atom-worker, to avoid conflicts when multiple AtoM installations are co-tenanted on the same server.
  • treeview_items_per-page_max: Increase the maximum allowed value for the full-width treeview paging limit - see: Items per page
An image of the app.yml file in the command-line

Important

Symfony (the PHP framework that AtoM uses) has a cascading system of priorization for configuration files - if you create an app.yml file in apps/qubit/config/, its settings will override those found in config/app.yml. This can be useful if you want to change some configuration values without actually altering AtoM’s installation defaults - Artefactual uses this method for automated deployment via Ansible, for example.

If your settings changes aren’t taking effect in config/app.yml and you’ve already cleared the cache and restarted php-fpm, you might want to double-check to make sure you don’t have a file in apps/qubit/config/app.yml overriding the other configuration file. If you are using the Vagrant box for example, you will have this extra config file, since Artefactual uses Ansible to automate the build of the Vagrant box.

An example of the app.yml file in apps/qubit/config

There are also some settings in this file (such as the read_only setting) that may be overwritten by environment variables in the PHP pool set up during installation. For general information, see below, Application server. For specific information on setting up read-only mode in AtoM, see:

Back to top

apps/qubit/config/settings.yml

  • Symfony and PHP settings - see the Symfony documentation for more general information: http://symfony.com/legacy/doc/reference/1_4/en/04-Settings
  • For things like default_culture, default_timezone, login_module, etc
  • Includes settings for error handling behavior as well - be careful changing these! We don’t recommend it.

Back to top

config/factories.yml

  • Another Symfony 1.x configuration file
  • More details at: http://symfony.com/legacy/doc/reference/1_4/en/05-factories
  • Useful for changing logging options, user class (e.g. LDAP or CAS), etc
  • We don’t recommend changing this file unless you know what you’re doing!
  • See: Logging for some ideas on how to work with these settings to change or improve logging in AtoM

Back to top

config/config.php

  • Where basic configuration information for database access is stored, such as the database user, pass, and name
  • We don’t recommend changing this file unless you know what you’re doing!

Back to top

config/sitemap.yml

This configuration file is used in conjunction with the sitemap generation command-line task - for more information, see: Generate an XML sitemap for search engine optimization.

This file contains the priorities (or weighting) for each level of description of archival descriptions included in the sitemap the CLI task will generate. If you have added new levels of description to the Levels of description taxonomy, you can give them a priority here, or adjust the default priorities included in the file (shown in the image below).

An image of the sitemap.yml file in the command-line

Back to top

config/search.yml

This configuration file is used to configure Elasticsearch (ES), the search index used in AtoM, including:

  • The host and port of your Elasticsearch index, configured during installation via the command-line installer
  • The normalizers, analyzers and filters used by Elasticsearch. See the Elasticsearch documentation for more information on these, and be sure you are looking at the documentation for the correct ES version
  • Number of shards and replicas created - these are paramters used for performance optimization and scalability. See the Elasticsearch documentation for more information
  • The tokenizers and filters used per culture - these can be useful to adjust when trying to improve AtoM’s multilingual search for a specific language. See the Elasticsearch documentation for more information. This includes whether or not stop words are being filtered for a particular language.
An image of the search configuration file

There are also two additional global configuration settings worth mentioning, that can be customized as needed. Be aware that making changes can increase the size of your ES index and require more resources (memory, disk space, etc) if changed.

The first value is the index.mapping.total_fields.limit. This setting defines the maximum number of fields in an index. Field and object mappings, as well as field aliases count towards this limit. By default in new AtoM installations, this value is set to 3000. In particularly large installations it’s possible that this default value is not high enough to support a full index of your data. You will know this is the case if you encounter a message like the following message when attempting to run the Populate search index command:

Limit of total fields [3000] in index [atom] has been exceeded

The second value is the index.max_result_window setting. By default Elasticsearch sets a limit on the number of results returned, since these impact the amount of heap memory required for your search index. This value is set to 10,000 in AtoM by default in new installations.

This means that, in the event that there are more than 10,000 results to return when searching or browsing, AtoM will stop loading results after the limit is reached, to preserve memory capacity, and the user will see the following message:

Sort options error message

Users can use the sort direction options in the Sort buttons available on search and browse pages to reverse the sort direction and view results from the end of the list. However, if desired, a system administrator can increase the index.max_result_window value to allow more results to be accessed before the limit is reached. Be aware that this will impact memory usage!

If you make any changes to the search.yml file, you should:

Back to top

plugins/arCasPlugin/config/app.yml

This file contains additional parameters that can be used to configure the CAS single sign-on authentication plugin. For more information, see:

An image of the configuration file in the CAS authentication plugin

Values that can be configured here include:

  • cas_version can be set to 1.0, 2.0, or 3.0. For more information, see: https://apereo.github.io/cas/5.2.x/protocol/CAS-Protocol.html
  • You can configure the connection to your CAS authentication server by adjusting the server_name, server_port, and server_path values
  • The location of your CAS server’s SSL certificate can be configured. By default in a new installation, the server_cert parameter is set to false. While CAS server SSL validation can be disabled for development, we strongly discourage doing so in a production environment.
  • You can configure AtoM user groups to match your CAS user attributes using the set_groups_from_attributes parameter, adjusting the attribute_key that should be used, and configuring the various user_groups values to match your CAS group IDs. For more information, see: Setting AtoM group membership from CAS user attributes.

For further details on basic configuration, see the Administrator’s manual:

There is one other parameter worth mentioning in this file: the service_url variable. This setting lets a system administrator specify the AtoM site URL that the CAS server should use when responding to authentication requests, regardless of where the user originates. This can be useful when multiple domain names with redirects are used for your AtoM site for example, or when the hostname does not match the host part of the AtoM instance URL.

By default, the CAS server will redirect users back to the URL from which the request originated, but this may not always work as expected when there are different domains or subdomains used, and can break the authentication procedure.

To avoid this, system administrators can use the service_url parameter to specify the perferred service URL for your AtoM site that the CAS server should redirect users to after successfully completing authentication.

Example:

service_url: https://atom.somedomain.org/cas/login

Back to top

Security configuration files

AtoM includes the ability for an administrator to create and manage user accounts, add them to groups, and configure permissions per user or per group. For more information, see:

However, there are some default permissions that are set in AtoM on a per-group basis that do not currently have granular and customizable permissions settings available via the user interface. In some cases, the default access permissions can be modified via a number of security.yml configuration files found in AtoM.

These security configuration files control application routing - meaning they are applied during page requests, and before any application code is loaded for the page in question. In some case, a system administrator can adjust these files to restrict or provide access to modules on a per-group basis.

Note

As these security configuration files control routing and not access control, in some cases, access control checks may be hard-coded into the application code for particular pages, and while changing the related security.yml file may allow a member of a different user group to navigate to a previously restricted page, ACL checks in the page may still restrict access upon arrival.

An example of this would be the Accession record security configuration described below. The security configuration file contains browse and edit parameters, but application code ACL checks currently limit view, create, edit, and delete permissions to the administrator and editor groups.

This means that if you wanted to allow another user group to view and edit accession records, updating the security.yml file alone would not suffice - you would also need to make changes to the application code.

Basic file structure

Below is an example default configuration file - this example is for access to the taxonomies, and is located at apps/qubit/modules/taxonomy/config/security.yml.

browse:
  credentials: [[ editor, administrator ]]

list:
  credentials: [[ editor, administrator ]]

index:
  is_secure: false

autocomplete:
  is_secure: false

all:
  is_secure: true

Each security YAML file will include a list of component parameters, and related default permissions. When all includes is_secure: true as a nested value, this means that by default all relevant components will have a permissions check applied and routing access will be restricted to any listed user groups, unless otherwise declared. In the example above, the autocomplete search results for taxonomy terms includes an is_secure: false key/value pair, which overrides the global all variable for that particular component. The ability to browse the taxonomies, and see the view page for a particular taxonomy (list) has been restricted by default to the editor and administrator user groups.

Important

In general, we don’t recommend changing the global all parameters.

As always when making configuration and code changes, we strongly recommend that you make a back up of your data before proceeding and test thoroughly before any changes on a production instance!

When just one user group is granted access to a particular component, it can be listed immediately after the component name, like this example:

import:
  credentials: administrator

To list multiple groups, enclose the group names in two sets of square brackets and use commas to separate user group names. If you have created custom groups, you can add custom group permissions for them to these configuration files by including the exact form of name of the group, like so:

import:
  credentials: [[ editor, mycustomgroup, administrator ]]

Tip

To avoid any errors or unexpected outcomes during this configuration, we recommend that custom group names do not include spaces or special characters.

As with all configuration files, if you make any changes, clear the application cache and restart PHP-FPM to apply the changes.

Below is a list of some of the key security configuration files available in AtoM. This list is not comprehensive. Not covered below are some files that relate to the underlying Symfony framework (and should not be altered), configuration files for optional plugins (like the arStorageServicePlugin used for Archivematica integration), and other files that are not easily configured to be accessible to other groups via the user interface.

Jump to:

Important

While permission to perform certain actions can be modified on a per-group basis by changing these configuration files, control of main menu nodes such as the gears Admin and import Import menus is set via code, and is restricted by default to the administrator group.

However,an administrator can use the Manage Menus module to add links in other menus that the designated group can access, such as the manage Manage menu, as shown in the example configuration below for granting access to Editors to the CSV import module:

An image of how an administrator might add a link to the CSV import page to the Manage menu, so Editors can access it.

For more information on import security configuration, see below. In the example above, the editor group would need to be added to both the import and importSelect options in the related security.yml file.

Back to top

Import security configuration

  • File location: apps/qubit/modules/object/config/security.yml

This file controls the options for import and validation, including:

Key parameters

  • import: Sets access to run CSV and XML imports
  • importSelect: Sets access to the import configuration page
  • validateCsv: Sets access to run CSV validation jobs

Note

Access to the import Import menu is restricted by default to the administrator group in the application code. An administrator can use the Manage Menus module to add a link to another menu if access is required for other groups.

Accession record security configuration

  • File location: plugins/qtAccessionPlugin/modules/accession/config/security.yml

This file controls the ability for user groups to manage accession records. See:

Key parameters

  • browse: Sets access to the Accessions browse page. Also controls whether a link to the browse page will be available to the relevant user group in the pencil Manage menu.
  • edit: Sets access to the ability to edit existing accession records

There is another parameter not listed here, which could be manually added: index will control the routing to access the view page of accession records.

Note

Currently, access to accessions is limited via application code to the Administrator and Editor user groups. See:

A developer would need to modify the permissions check in the link above to allow additional groups to access and modify accession records.

Description updates security configuration

  • File location: apps/qubit/modules/search/config/security.yml

The Description Updates module, normally restricted to the administrator user group, is designed to help authorized users identify new and recently modified records in the system. For more information, see:

By making modifications to this security configuration file and adding a link to the Description Updates page to a different main menu node that all necessary user groups can access, it’s possible to allow others to use this module as well for administration of the site and its metadata.

Key parameters

  • descriptionUpdates: Sets access to the Description Updates page
  • globalReplace: This is an outdated module that is currently not operational in AtoM, and should not be modified.

Physical storage security configuration

  • File location: apps/qubit/modules/physicalobject/config/security.yml

This file controls the ability for user groups to access and manage physical storage containers and locations. For more information, see:

Based on the default permissions configured in this file, contributors can view individual storage records from associated links on related archival description or accession records. Translators have the same access, but can also edit those containers they can access via this method, to be able to add translations. Editors and Administrators can browse, view, edit, and delete storage records.

Key parameters

  • autocomplete: Sets access to viewing matching containers when linking physical storage to other entities via the available autocomplete. See: Link physical storage.
  • boxList: Sets access to the box list report, avaiable by clicking on the printer icon on the view page of the related storage container. For more information, see: Create physical storage report for a single container.
  • browse: Sets access to the physical storage browse page
  • delete: Sets access to the ability to delete physical storage containers and locations
  • edit: Sets access to the ability to edit existing storage containers, or add new ones
  • index: Sets access to the view page of individual storage containers.

Static page security configuration

  • File location: apps/qubit/modules/staticpage/config/security.yml

This file controls the ability for user groups to access and manage static pages in AtoM. For more information, see:

By default, static pages are publicly visible - however, the link to the management page for static pages is included by default in the gears Admin menu, and the default configuration of this security file limits edit and browse permissions to the administrator and translator user groups, and delete permissions to the administrator group.

Key parameters

  • delete: Sets access to the ability to delete existing static pages. Note that some static pages, such as the Home page, cannot be deleted, just modified.
  • edit: Sets access to the ability to modify existing static pages, and create new ones
  • list: Sets acess to the browse page for existing static pages.

Note

While modifying the list and edit parameters can allow additional user groups to browse existing static pages and create new ones, currently the ability to edit or delete existing static pages is restricted via application code to the administrator user group. See:

A developer would need to modify the permissions check in the link above to allow additional groups to modify and delete static pages.

Manage menus security configuration

  • File location: apps/qubit/modules/menu/config/security.yml

This file controls the ability for user groups to manage the links appearing in menus found in the AtoM header bar. For more information, see:

Some menus (such as the Browse menu and the clipboard, quick links, and language menus) are publicly visible by default, while others (such as those in the Main menu) are restricted to specific user groups. For a general overview of the AtoM header bar and its menus, see:

Key parameters

  • delete: Sets access to the ability to delete existing menu links. Note that some top-level menu nodes cannot be deleted, just modified.
  • edit: Sets access to the ability to modify existing menu links, and create new ones
  • list: Sets acess to the menu management page listing all menus and nodes.

Note

Access to the gears Admin menu, where the “Manage menus” menu link is located at installation, is restricted by default to the administrator group in the application code. An administrator can use the Manage Menus module to add a link to another menu if access is required for other groups.

Taxonomy security configuration

  • File location: apps/qubit/modules/taxonomy/config/security.yml

This file controls the routing access to exploring the various taxonomies in AtoM, used to maintain controlled vocabulary terms used in drop-down menus in AtoM’s edit page forms, or in some cases as access points. For more general information on taxonomies and terms, see:

At installation, a link to the taxonomies browse page is available in the manage Manage menu, and the default configuration of this file allows browse and view access to the editor and administrator user groups.

Important

Granular taxonomy permissions can be managed per user or per group by an administrator via the user interface using AtoM’s Permissions module. See:

We recommend making your taxonomy permission changes there first, and only modifying this security configuration file if access is not working as expected.

Key parameters

  • browse: Deprecated. Sets access to the list of taxonomies.
  • list: Sets access to the list of taxonomies
  • index: Sets access to the view page for a taxonomy
  • autocomplete: Sets access to matching term results showing up in autocomplete results from the global search box or when linking terms in related edit pages. Note that separate application code filters this list so that only subject and place access points are currently included as possible autocomplete matches in the global search.

Back to top

Application server

Remember that Nginx is just the HTTP frontend. Internally, each request is forwarded to php-fpm. php-fpm is a pool of managed AtoM processes. The pool has its own configuration file that defines some important global PHP settings like timeouts, and environment variables that may also modify the way that AtoM works as documented in accesstomemory.org.

The file of the pool is located at /etc/php/7.4/fpm/pool.d/atom.conf. Edit with nano. Once saved, run: sudo systemctl restart php7.4-fpm, and the changes will apply.

Back to top